JK-22/24/14/20D Fine & Medium-Fine Multi-Wire Drawing Machine with Continuous Annealer
Description
| Machine Model | JK-22DT | JK-24DT | JK-14DT | JK-20DAT |
| Electric Control Mode | Analog Button Motor Control
| |||
| Finished Wire Diameter | Φ0.1–Φ0.32 mm | Φ0.1–Φ0.25 mm | Φ0.30–Φ0.80 mm | Φ0.15–Φ0.70 mm |
| Inlet Wire Diameter | Φ0.6–Φ1.2 mm | Φ0.5–Φ1.0 mm | Φ0.8–Φ1.6 mm | Φ0.8–1.6 mm |
| Maximum Drawing Speed | Max 2000 mpm/min | Max 2000 mpm/min | Max 1200 mpm/min | Max 1800 mpm/min |
| Max. Number of Drawing Dies | 22 | 24 | 14 | 20 |
| Mechanical Area Reduction Rate | 15%+8% | 13%+8% | 15%+8% | 15%+8% |
| Machine Frame Structure | Welded Steel Plate with Stress Relief Annealing
| |||
| Drawing Capstan | Ceramic / Tungsten Carbide Coated Capstan
| |||
| Take-up Bobbin Size | Φ300mm (Customizable per customer’s requirement)
| |||
| Bobbin Loading & Unloading Mode | Screw Tightening Thimble Loading
| |||
| Max Copper Loading Weight | Max 50 KG
| |||
| Annealing Mode | DC Three-stage Annealing
| |||
| Main Motor Power | 11 KW | 11 KW | 15 KW, 6P | 15 KW |
| Take-up Spooler Motor Power | 3.7 KW | 3.7 KW | 5.5 KW | 5.5 KW |
| Max. Annealing Current | DC 250 A | DC 250 A | DC 600 A | DC 600 A |
| Max. Annealing Voltage | DC 55 V | DC 55 V | DC 60 V | DC 60 V |
| Annealing Power | 13 KVA | 13 KVA | 36 KVA | 36 KVA |
| Steam Output | 8 kg/h | 8 kg/h | 10 kg/h | 10 kg/h |
| Annealing Cooling Water Flow Rate | 150 L/min | 150 L/min | 250 L/min | 250 L/min |
| Overall Dimensions (L×W×H) | 2100×1600×1700 mm | 2100×1600×1700 mm | 2100×1600×1900 mm | 3020×1688×2015 mm |
| Machine Weight (kg) | 3000 KG | 3000 KG | 3200 KG | 4000 KG |
Related products
16-wire Small Wire Drawing Machine with Continuous Annealer
This multi-wire drawing machine is designed for drawing 16 copper wires simultaneously, enabling the production of 16 wires at the same time and greatly boosting production capacity. The machine adopts a two-layer structure with 25 drawing dies installed on each layer, and 8 wires pass through each die. In addition, it is equipped with a Siemens PLC HMI control system to realize highly efficient fully automatic production.
400-9/13D In-line Medium-Speed Large Wire Drawing Machine
This machine is a sliding type wire drawing machine adopting single-row straight drawing structure with equal-diameter capstans.▶ It adopts multi-stage gear transmission. The gears are precision ground cylindrical helical gears, and the bearing assembly consists of a pair of tapered roller bearings matched with a pair of ball bearings.▶ It applies oil-immersed cooling and lubrication for wire drawing. All drawing capstans are of insert assembly structure, and the rim surface is sprayed with tungsten carbide coating.▶ The take-up machine is equipped with looping off-line device, supporting dual-spool continuous spider-type take-up.▶ Both the main motor and take-up motor adopt frequency conversion speed regulation.
450-9/13D High-speed Bare Wire Large Drawing Machine
- Equipped with an independent motor for easy extension control and simple operation.
- Independent roller transmission prevents sliding wire drawing and generates less dust.
- High-speed precision gears deliver a longer service life and lower noise levels.
- Horizontal structure facilitates easier operation.
- Temperature control system guarantees production safety.
- Siemens drives and touchscreens simplify parameter configuration.
- Eco-friendly paint maintains the machine's color, luster and surface smoothness.
JK-4/8/16/24 Multi-wire Drawing Machine
High-precision helical gear transmission, unique oil lubrication mechanism, dual-motor drive and rapid die change system;The drawing oil lubrication adopts a powerful internal oil injection design inside the die holder, which delivers more sufficient lubrication, saves installation space and facilitates operation;Both the annealing contact copper rings and nickel sleeves are made of special alloy materials to extend service life;The on-line annealing control adopts zero-meter preset voltage design to ensure stable annealing quality of wire during machine startup and shutdown.
JK-450-13D High-speed Aluminum Rod Breakdown Machine, Dual-spool Take-up
Featuring inline-sliding continuous wire drawing, the machine’s capstans run submerged in drawing oil for aluminum wire production, supported by a dedicated lube-oil cooling & circulation system.Fully mechatronic with PLC and full-process touch-screen control, it achieves well-balanced mechanical-electrical speed, supporting quick die change and fully-pneumatic non-stop automatic spool switching for take-up.
