JK-20/22/24/14/22 Dual-Inverter Fine Multi-Wire Drawing Machine for Bare Copper Wire
Description
| Machine Model | JK-20D | JK-22DS | JK-24DS | JK-14DS | JK-22DW |
| Electric Control Mode | Traditional Analog Button Control
| ||||
| Power Control System | Dual Frequency Inverter Control
| ||||
| Finished Wire Diameter | Φ0.05–Φ0.12mm | Φ0.1–Φ0.4mm | Φ0.07–Φ0.25mm | Φ0.25–Φ0.6mm | Φ0.1–Φ0.60mm |
| Inlet Wire Diameter | Φ0.15–Φ0.4mm | Φ0.6–Φ1.2mm | Φ0.5–Φ1.0mm | Φ0.8–Φ1.6mm | Φ0.6–Φ1.2mm |
| Maximum Drawing Speed | Max 1800 m/min | Max 2500 m/min | Max 2500 m/min | Max 1200 m/min | Max 2200 m/min |
| Max. Number of Drawing Dies | 20 | 22 | 24 | 14 | 24 |
| Mechanical Area Reduction Rate | 10.5%+6% | 15%+8% | 13%+8% | 15%+8% | 13%+8% |
| Machine Frame Structure | Integral Cast Iron Frame
| ||||
| Drawing Capstan | Ceramic Coated Drawing Capstan
| ||||
| Bobbin Loading Mode | Screw Tightening Thimble Loading
| ||||
| Wire Traversing System | 50–100W Belt-Driven Synchronous Motor
| ||||
| Main Motor Power | 3.7KW | 11KW | 11KW | 15KW | 11KW |
| Take-up Spooler Motor Power | 2.2KW | 3.7KW | 3.7KW | 5.5KW | 3.7KW |
| Transmission Mode
| Flat Belt Drive
| ||||
| Max Copper Loading Capacity | Max 30KG | Max 50KG | Max 50KG | Max 50KG | Max 50KG |
| Braking Mode | Electromagnetic Brake
| ||||
| Bearing Lubrication Mode | Oil-Free Lubrication
| ||||
| Wire Drawing Lubrication Mode | Spray Lubrication Type
| ||||
| Overall Dimensions (L×W×H) | 1900(L)*1350(W)* 1750(H)mm | 2050(L)*1600(W)* 1900(H)mm | 2050(L)*1600(W)* 1900(H)mm | 2600(L)*1600(W)* 1900(H)mm | 2400(L)*1352(W)* 1970(H)mm |
| Machine Weight (kg) | 1900KG | 2400KG | 2400KG | 2200KG | 2800KG |
Related products
16-wire Small Wire Drawing Machine with Continuous Annealer
This multi-wire drawing machine is designed for drawing 16 copper wires simultaneously, enabling the production of 16 wires at the same time and greatly boosting production capacity. The machine adopts a two-layer structure with 25 drawing dies installed on each layer, and 8 wires pass through each die. In addition, it is equipped with a Siemens PLC HMI control system to realize highly efficient fully automatic production.
400-9/13D In-line Medium-Speed Large Wire Drawing Machine
This machine is a sliding type wire drawing machine adopting single-row straight drawing structure with equal-diameter capstans.▶ It adopts multi-stage gear transmission. The gears are precision ground cylindrical helical gears, and the bearing assembly consists of a pair of tapered roller bearings matched with a pair of ball bearings.▶ It applies oil-immersed cooling and lubrication for wire drawing. All drawing capstans are of insert assembly structure, and the rim surface is sprayed with tungsten carbide coating.▶ The take-up machine is equipped with looping off-line device, supporting dual-spool continuous spider-type take-up.▶ Both the main motor and take-up motor adopt frequency conversion speed regulation.
450-9/13D High-speed Bare Wire Large Drawing Machine
- Equipped with an independent motor for easy extension control and simple operation.
- Independent roller transmission prevents sliding wire drawing and generates less dust.
- High-speed precision gears deliver a longer service life and lower noise levels.
- Horizontal structure facilitates easier operation.
- Temperature control system guarantees production safety.
- Siemens drives and touchscreens simplify parameter configuration.
- Eco-friendly paint maintains the machine's color, luster and surface smoothness.
JK-4/8/16/24 Multi-wire Drawing Machine
High-precision helical gear transmission, unique oil lubrication mechanism, dual-motor drive and rapid die change system;The drawing oil lubrication adopts a powerful internal oil injection design inside the die holder, which delivers more sufficient lubrication, saves installation space and facilitates operation;Both the annealing contact copper rings and nickel sleeves are made of special alloy materials to extend service life;The on-line annealing control adopts zero-meter preset voltage design to ensure stable annealing quality of wire during machine startup and shutdown.
