450-9/13D Low Speed Cone Pulley Type Rod Breakdown Machine
Description
| Machine Model | JK-450/9D(Cone Pulley Type) | JK-450/13D(Cone Pulley Type) |
| Finished Wire Diameter | Φ3.0-Φ2.6mm/Copper Wire Φ4.5-Φ3.0mm/Aluminum wire | Φ3.0-Φ2.0mm/MAX Copper wire Φ4.7-Φ1.8mm/MAX Aluminum wire |
| Inlet Wire Diameter | Φ8.0mm/MAX Copper wire Φ9.5mm/MAX Aluminum wire | Φ8.0mm/MAX Copper wire Φ9.5mm/MAX Aluminum wire |
| Maximum Drawing Speed | 5-6.5m/s | 8-9m/s |
| Max. Number of Drawing Dies | 9 | 13 |
| Mechanical Elongation Coefficient | 1.2-1.28 | 1.2-1.28 |
| Fixed Capstan Diameter | Φ450mm | |
| Number of Cone Pulley Stages | 4N | |
| Transmission Mode | By precision ground gears | |
| Main Motor Power | AC110KW | AC132KW |
| Speed Regulation Mode | Frequency inverter control | |
| Take-up Spooler Motor Power | AC15KW 6P | |
| Wire Drawing Lubrication Mode | spray type | |
| 伸线油量Lubricant Oil Flow Rate | 500L/Min | 800L/Min |
| Bearing Lubrication Mode | Pumpenforce oil | |
| (L*W*H)Overall Dimensions (L×W×H) | 5400(L)*1450(W)*1020(H) | 8700(L)*1200(W)*1200(H) | |
| Machine weight(kg) | 6000KG | 6000KG | |
Related products
16-wire Small Wire Drawing Machine with Continuous Annealer
This multi-wire drawing machine is designed for drawing 16 copper wires simultaneously, enabling the production of 16 wires at the same time and greatly boosting production capacity. The machine adopts a two-layer structure with 25 drawing dies installed on each layer, and 8 wires pass through each die. In addition, it is equipped with a Siemens PLC HMI control system to realize highly efficient fully automatic production.
400-9/13D In-line Medium-Speed Large Wire Drawing Machine
This machine is a sliding type wire drawing machine adopting single-row straight drawing structure with equal-diameter capstans.▶ It adopts multi-stage gear transmission. The gears are precision ground cylindrical helical gears, and the bearing assembly consists of a pair of tapered roller bearings matched with a pair of ball bearings.▶ It applies oil-immersed cooling and lubrication for wire drawing. All drawing capstans are of insert assembly structure, and the rim surface is sprayed with tungsten carbide coating.▶ The take-up machine is equipped with looping off-line device, supporting dual-spool continuous spider-type take-up.▶ Both the main motor and take-up motor adopt frequency conversion speed regulation.
JK-4/8/16/24 Multi-wire Drawing Machine
High-precision helical gear transmission, unique oil lubrication mechanism, dual-motor drive and rapid die change system;The drawing oil lubrication adopts a powerful internal oil injection design inside the die holder, which delivers more sufficient lubrication, saves installation space and facilitates operation;Both the annealing contact copper rings and nickel sleeves are made of special alloy materials to extend service life;The on-line annealing control adopts zero-meter preset voltage design to ensure stable annealing quality of wire during machine startup and shutdown.
