JK-17DS-WS630 Medium-speed Gear-driven Intermediate Wire Drawing Machine for Aluminum Wire
Advantages: The water tank and gearbox are integrally welded. Two-stage sealing is arranged between the water tank and gearbox. The front and rear bores are machined in one-time boring operation, which effectively guarantees high concentricity.
Description
| No. | Item | Specification |
| (1) | Applicable Raw Material | Aluminum wire |
| (2) | In-coming Wire Range | Φ3.0-Φ2.6 mm |
| (3) | Outlet Wire Range | Φ1.8-Φ0.5 mm |
| (4) | Outlet Speed | Wire dia. Φ0.7-0.5 mm 1500-1300 MPMWire dia. Φ1.2-0.7 mm 1200-800 MPMWire dia. Φ1.8-1.2 mm 800-600 MPM |
| (5) | Max. Number of Dies | 17 pcs (Dies supplied by buyer) |
| (6) | Die Outer Dimension | Φ30 mm ×15 mm thickness or Φ25 mm ×10 mm thickness |
| (7) | Mechanical Area Reduction | 1st-16th die: 15 %17th die: 10 % |
| (8) | Main Motor | 37 KW AC, stepless speed control via frequency converter |
| (9) | Take-up Motor | 11 KW AC, independent frequency converter equipped |
| (10) | Max. Take-up Weight | 250-500 KG MAX |
| (11) | Max. Take-up Outer Diameter | Φ630 mm MAX |
| (12) | Drawing Capstan | 4-piece split-type capstan with silicon-carbide ceramic ring |
| (13) | Drawing Lubrication Mode | Full-immersion type |
| (14) | Traverse System | 90 W reversible motor for traversing, ball screw + linear guide rail |
| (15) | Braking System | Pneumatic brake |
| (16) | Operating Air Pressure | 4-6 kg/cm² |
| (17) | Installed Capacity | 52 KW |
Power Supply
Provide required total power
| Item | Specification |
| Three-phase Voltage | ~AC 3×380 (±10%) |
| Single-phase Voltage | ~AC 220 (±10%) |
| Power Frequency | 50 Hz (±2%) |
Compressed Air
| Item | Specification |
| Working Pressure | 0.6-0.7 MPa |
| Fluctuation Value | +0.02 MPa |
| Dew Point | -25 ℃ |
| Flow Rate | 200 L/min |
Water Requirement
| Item | Specification |
| Working Pressure | 0.2-0.4 MPa |
| Temperature | ≤25 ℃ |
| PH Value | 7-8 |
| Flow Rate | 420 L/min |
Note: Cooling water shall be free of suspended solids, mineral substances, metallic impurities, insoluble and corrosive substances.
Related products
400-9/13D In-line Medium-Speed Large Wire Drawing Machine
This machine is a sliding type wire drawing machine adopting single-row straight drawing structure with equal-diameter capstans.▶ It adopts multi-stage gear transmission. The gears are precision ground cylindrical helical gears, and the bearing assembly consists of a pair of tapered roller bearings matched with a pair of ball bearings.▶ It applies oil-immersed cooling and lubrication for wire drawing. All drawing capstans are of insert assembly structure, and the rim surface is sprayed with tungsten carbide coating.▶ The take-up machine is equipped with looping off-line device, supporting dual-spool continuous spider-type take-up.▶ Both the main motor and take-up motor adopt frequency conversion speed regulation.
JK-11D-450 Individual Capstan Motor Wire Drawing Machine with Dual Spool Take-up
The machine features inline sliding continuous wire drawing. Capstans are submerged in drawing emulsion for aluminum wire production. Equipped with independent direct-drive motors, the drawing section comes with a complete lubrication & cooling circulation system.Fully mechatronic, it runs on PLC with full-process touchscreen control. Optimized mechanical & electrical speed matching enables quick die change and pneumatic automatic non-stop spool switching. All production data is accessible and adjustable via color touchscreen HMI. Advantages: simple operation, high productivity and stable product quality.
JK-450-13D High-speed Aluminum Rod Breakdown Machine, Dual-spool Take-up
Featuring inline-sliding continuous wire drawing, the machine’s capstans run submerged in drawing oil for aluminum wire production, supported by a dedicated lube-oil cooling & circulation system.Fully mechatronic with PLC and full-process touch-screen control, it achieves well-balanced mechanical-electrical speed, supporting quick die change and fully-pneumatic non-stop automatic spool switching for take-up.